How to Power Cycle a Wyze Camera: A Step-by-Step Guide

How to Power Cycle a Wyze Camera

How to Power Cycle a Wyze Camera? To power cycle your Wyze Camera, Unplug it for 30 seconds, then reconnect it to the power outlet. This will restart the camera and may fix any connection difficulties. If the issue continues, try resetting the camera for 10 seconds by pushing and holding the micro-USB connector.

Wyze cameras have gained immense popularity for their affordability, ease of use, and efficient home security features. However, like any electronic device, they might encounter occasional glitches that can be resolved through troubleshooting. One effective solution is power cycling, which involves turning off the device, letting it rest for a moment, and then turning it back on.

Understanding Power Cycling

Power cycling, also known as a hard reset or reboot, is shutting down an electronic device, allowing it to fully discharge any residual power and restarting it. This action can resolve minor software glitches, connectivity issues, and other problems affecting the device’s performance. Power cycling does not erase your camera’s settings or data; it simply gives the device a fresh start by clearing temporary memory and reinitializing its components.

When to Power Cycle a Wyze Camera

There are a few instances when power cycling a Wyze camera might be beneficial:

  1. Connectivity Issues: If your camera is not connecting to the Wyze app or experiencing intermittent connectivity, power cycling can help re-establish a stable connection.
  2. Freezing or Lagging: If the camera’s feed freezes, lags, or becomes unresponsive, a power cycle might resolve the issue.
  3. App Errors: When the Wyze app is not functioning as expected, power cycling the camera can refresh the connection between the camera and the app.
  4. Troubleshooting Unidentified Issues: If you’re experiencing any other unexplained issues with your Wyze camera, power cycling is a good initial step before proceeding with more complex troubleshooting.

Related: Why Is My iPhone Camera Blinking?

Step-by-Step Guide to Power Cycling a Wyze Camera

Follow these simple steps to power cycle your Wyze camera:

1. Prepare for the Power Cycle

Before you begin, ensure you have the following:

  • Your Wyze camera
  • A stable Wi-Fi connection
  • Your smartphone or tablet with the Wyze app installed

2. Access the Camera Settings

  1. Open the Wyze app on your smartphone or tablet.
  2. Log in to your Wyze account if you haven’t already.
  3. Tap on the camera you want to power cycle. This will open the live feed from that camera.

3. Power Off the Camera

  1. Locate the power cable connected to your Wyze camera.
  2. Gently unplug the power cable from the camera. If your camera has a built-in battery, you might also need to remove the battery.
  3. If the camera has a power button, press it to ensure any residual power is drained.

4. Wait and Refresh

  1. Once the camera is disconnected from power, wait 10 to 15 seconds. This dissipates residual power and gives the camera a brief rest.
  2. During this time, you can also check your Wi-Fi router and ensure it’s functioning properly.

5. Power On the Camera

  1. Reconnect the power cable to the camera or reinsert the battery if you removed it.
  2. Wait for the camera to power on completely. This might take a minute or two as the camera initializes.

6. Check the Connection

  1. Go back to the Wyze app on your smartphone or tablet.
  2. Refresh the app or return to the camera’s live feed.
  3. You should see the camera’s feed and controls as usual, indicating that the power cycle was successful.

7. Test Functionality

  1. Perform a few test actions to ensure the camera functions as expected. You can try:
    • Panning or tilting the camera (if applicable)
    • Turning on and off any features like motion tracking or night vision
    • Checking if the camera responds promptly to commands from the Wyze app

8. Monitor for Improvement

  1. Observe the camera’s performance over the next few hours or days to confirm whether the power cycle resolved the issue. If you notice that the camera is functioning properly, the power cycle succeeded.

People Also Ask

How do I get my Wyze camera back online?

To get your Wyze camera back online, you can follow these troubleshooting tips:

  1. Check WiFi Connection: Ensure that your Wyze camera is within the range of your 2.4 GHz WiFi network. Avoid using 5 GHz as Wyze cameras only support 2.4 GHz.

  2. Verify WiFi Password: Confirm that the WiFi password entered in the Wyze app is correct and case-sensitive.

  3. Power Cycle: Perform a power cycle on all the devices involved, including the Wyze camera and your router.

  4. Update Firmware and App: Ensure that both the Wyze camera firmware and the Wyze app are up to date.

  5. Factory Reset: Consider a factory reset of the camera and set it up afresh if the above steps don’t work.

Why Do I Have to Keep Power Cycling My Wyze Camera?

Find yourself having to repeatedly power cycle your Wyze camera. It may be due to network connection issues, an outdated app or firmware, poor signal strength, or low battery for Wyze outdoor cameras.

Why Is My Wyze Camera Not Turning On?

If your Wyze camera is not turning on, it could be due to several reasons, such as a power supply issue, low battery (for outdoor cameras), or a hardware malfunction. In such cases, it’s advisable to check the power source and battery status (for outdoor cameras), and consider power cycling the camera.

How Do I Reset My Wyze After a Power Outage?

To reset your Wyze camera after a power outage, you can first ensure that the power source is stable and then power cycle the camera. If the issue persists, consider updating the camera firmware and app, as well as checking the WiFi connection and password.

How to Power Cycle Wyze Camera Error Code 90?

If you encounter error code 90 when power cycling your Wyze camera, it could indicate a communication issue between the camera and the Wyze servers. In such cases, ensuring a stable internet connection, updating the firmware, and power cycling the camera may help resolve the error.

How to Power Cycle Wyze Camera v2 and v3?

For both Wyze Camera v2 and v3, you can follow the same power cycling process, which involves unplugging the camera, waiting for a few seconds, and then plugging it back in. It’s also essential to make sure that the camera is within the range of a stable 2.4 GHz WiFi network.

Wyze Cam Power Cycle Error 90:

If you are experiencing the Wyze Cam power cycle error 90, it may be related to a network communication issue. Check your internet connection and ensure that the camera is connected to a stable 2.4 GHz WiFi network. Additionally, consider updating the camera’s firmware and power cycling the device to resolve the error.

How to Power Cycle a Wyze Floodlight Camera?

To power cycle a Wyze Floodlight Camera, you can start by switching off the power supply to the camera, waiting for a few seconds, and then turning it back on. Ensure a stable internet connection and check the WiFi network’s compatibility with the camera’s frequency requirements.

Why is My Wyze Camera Flashing Red?

A Wyze camera flashing red typically indicates that it is unable to connect to the WiFi network. This could be due to an incorrect password, WiFi frequency compatibility issues, or a loss of network connection. Ensure that the camera is within the range of a stable 2.4 GHz WiFi network and that the WiFi password is entered correctly. If the issue persists, consider power cycling the camera and checking for firmware updates.


Q1: What is power cycling and why should I do it for my Wyze camera?

  • Power cycling, also known as a hard reset, involves turning off your Wyze camera, waiting for a short period, and then turning it back on. It’s a useful troubleshooting step to resolve minor issues like connectivity problems, freezing, or app errors. Power cycling helps clear temporary memory and reinitializes the camera’s components without erasing settings or data.

Q2: How often should I power cycle my Wyze camera?

  • Power cycling is something you can do without regularly. It’s primarily used as a troubleshooting step when encountering camera performance issues. If you face connectivity problems, freezing, or other unexplained issues, consider power cycling your camera.

Q3: Will power cycling my Wyze camera erase my settings and videos?

  • Power cycling does not erase your camera’s settings or stored videos. It only provides a fresh start by clearing temporary issues and restarting the camera’s components. Your settings and videos will remain intact.

Q4: How long should I wait during the power cycle?

  • It’s recommended to wait 10 to 15 seconds after disconnecting the camera from power. This dissipates residual power and gives the camera a short break before you turn it back on.

Q5: Can I power cycle my Wyze camera using the app?

  • Power cycling involves disconnecting and reconnecting the camera’s power source. It cannot be done directly through the app. You need to unplug the power cable or remove the battery (if applicable), wait a moment, and then plug the camera back in or reinsert the battery.

Q6: What issues can power cycling fix?

  • Power cycling can help resolve various issues, including connectivity problems, camera feed freezing or lagging, unresponsive controls, and app errors. It’s a good initial troubleshooting step for addressing these common problems.

Q7: What should I do next if power cycling doesn’t work?

  • If power cycling doesn’t resolve the issue you’re facing with your Wyze camera, you can try other troubleshooting steps. These include checking your Wi-Fi connection, ensuring your camera’s firmware is current, or contacting Wyze customer support for further assistance.

Q8: Is power cycling the same as factory resetting the camera?

  • No, power cycling and factory resetting are different processes. Power cycling involves temporarily turning off the camera and turning it back on to clear temporary issues. On the other hand, factory resetting erases all your camera’s settings and returns it to its default state. Factory resetting should be a last resort if all other troubleshooting methods fail.


Power cycling a Wyze camera is a straightforward and effective troubleshooting method to resolve minor issues and glitches. Following this step-by-step guide, you can easily power cycle your camera and restore its functionality. Remember that power cycling does not erase your camera’s settings or data; it’s simply a method to refresh the device and clear any temporary issues. If power cycling doesn’t resolve the problem or the issue persists, you should explore further troubleshooting options or contact Wyze customer support for assistance.


Hey, I am Muhammad Waseem an experienced SEO specialist having Five years of experience in SEO and Blogging field. Also founder of and many other websites.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button